Subject: Maha MH-BP-199/200 for the Icom T8A
Date: Wed, 25 Nov 1998 21:04:20 -0800
From: "William Chueh" <williamc@maha-comm.com>
To: <richardr@sssnet.com>

Dear sir,

    Happy Thanksgiving!! I am with Maha Communications, Inc., a leading
battery pack manufacturer for the amateur radio. In October, we have
released two new battery packs, MH-BP-199, and MH-BP-200 for the Icom T8A.
In particular, your problem was addressed. I thought I should share this
information solely from a technical point of view:

1) The material on Maha battery pack is greatly enhanced by ABS material.
2) The reason the original battery pack may experience occasional problem is
because the "pressure point" was not applied correctly. This problem is
addressed in our battery pack by "moving" the pressure point away from the
edge of the tab to the larger surface. As a result, we pushing it down, the
pressure was be deflected on the entire clip rather than just a single edge.

    Although there is little appearant differences between the MAHA and
Icom, there is a great deal of engineering put in on that tab.

    I hope this information helps you to find a solution to your
difficulties.

Regards,

==============================================
|   William Chueh                             |       2841-B Saturn St.   |
|   williamc@maha-comm.com          |       Brea, CA 92821      |
|   Maha Communications, Inc.         |       Tel: 800-376-9992    |
|   http://www.maha-comm.com/       |       Fax: 714-985-9222    |
==============================================
You are experiencing Maha's Exclusive On-Line "PrioritySupport".
Did our representative reply in a prompt and professional manner?
Direct your comments to prioritysupport@maha-comm.com